Gear shift mechanism Citroën Peugeot 9814652680

€ 151.00

Stellantis CITROEN PEUGEOT
9814652680

1 disponibili

Descrizione

Gear shift lever, gear shift mechanism with cables, gearbox selector for various CITROEN, PEUGEOT and other Stellantis models
From a vehicle with 84,000 km
With gear shift knob

Part description

Gear shift mechanism with cables 9814652680 transfers the movement of the gear shift lever to the gear selection mechanism. The used part offered also includes the gear shift knob and comes from a vehicle with the stated mileage of 84,000 km. The assembly is a practical option when repairing the gear shift controls, if diagnostics confirm a fault in the gear shift mechanism or cables.

The documentation lists the following models: Citroën Berlingo K9, PEUGEOT RIFTER, FIAT DOBLO III, OPEL COMBO E K9 and Toyota ProAce City. When selecting a part, it is important to compare in particular the product number 9814652680, the mounting design and the cable ends with the original part. A matching model name alone does not guarantee an identical gear shift design.

Technical information

  • Manufacturer: not specified; the documentation lists the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën Berlingo K9; FIAT DOBLO III; OPEL COMBO E K9; PEUGEOT RIFTER; Toyota ProAce City.
  • Part type: gear shift lever, gear shift mechanism with cables, gearbox selector.
  • Assembly component: gear shift knob.
  • Condition: used part.
  • Donor vehicle mileage: 84,000 km.
  • Other numbers: not specified.

Product codes

  • Product codes: 9814652680.

Compare the number with the marking on the original part and also check the assembly design.

Installation recommendations

The following procedure is general guidance for a gear shift mechanism with cables. Access to the part, the method for releasing the cable ends and any adjustment depend on the specific model and gearbox design. Follow the vehicle’s service documentation for the exact procedure.

1) Before installation

  • Compare the product number, shape of the gear shift mechanism, mounting points, cable routing and cable ends with the old part.
  • Inspect the gear shift mechanism housing, bushings, cable ends, cable sheaths and any grommets. Look for cracks, deformation, corrosion and damaged retaining components.
  • Carefully check that the mechanism and cables move freely. Do not force them past resistance, and do not disassemble adjustment components without understanding their function.
  • Also check the gear shift mechanism on the gearbox and its mounting to ensure that the cause of the problem is not outside the assembly being replaced.

2) Tools and materials required

  • Standard hand tools suitable for the fasteners used, and a torque wrench for tightening according to the service documentation.
  • Tools for carefully removing trim and releasing clips.
  • A flashlight, cleaning cloths and materials for marking or photographing the cable routing.
  • Locking or adjustment tools, if required, only when specified by the manufacturer’s procedure.

3) Installation procedure step by step

  1. Secure the vehicle against movement, and switch off the engine and ignition. If the work requires disconnecting electrical connections, disconnect the battery according to the manufacturer’s instructions.
  2. Gain access to the gear shift mechanism and cable connections according to the service procedure. Release trim and clips without using force.
  3. Record the original cable routing, the position of the brackets and grommets, and how the cable ends are secured.
  4. Set the mechanism to the position specified for removal and any adjustment. If the manufacturer requires it to be locked, do so using the specified method.
  5. Release the cable ends and remove their sheaths from the brackets. Do not pull on the cables themselves or pry plastic parts with an unsuitable tool.
  6. Release the gear shift mechanism fasteners and carefully remove the assembly. Do not sharply bend the cables while handling them.
  7. Clean the mating surfaces and inspect the brackets, passages and retaining components. Repair any damaged mounting points before installing the part.
  8. Position the replacement gear shift mechanism and route the cables along their original path. Make sure they are not twisted, stretched or in contact with moving or hot parts.
  9. Secure the sheaths in the brackets, connect the cable ends and check that all retainers are properly seated. Tighten the fasteners according to the vehicle manufacturer’s specifications.
  10. If the specific design requires cable adjustment, carry it out according to the service procedure. Then remove any locking tools.
  11. Before refitting the trim, check that the mechanism operates correctly and the cables are properly seated. Then reinstall the removed trim and other components.

4) Checks after installation and test drive/functional check

First, with the engine switched off, check the movement of the lever and selection of each position without applying excessive force. Then, with the vehicle safely secured, check that the gear shift operates normally. Only take a short test drive after the static check has been completed successfully. Check for accurate gear selection, unusual resistance, play and noises. If a gear cannot be selected reliably, do not continue driving; check the installation and any adjustments.

5) Most common installation errors + how to avoid them

  • Choosing the wrong design: before installation, compare the part number, mounting points and cable ends.
  • Incorrect cable routing: use the record of the original routing and avoid sharp bends or tension.
  • Retainers and cable ends not fully engaged: carefully check every connection after fitting.
  • Adjusting by guesswork: use the procedure specified for the specific gearbox, rather than relying only on how the lever feels.
  • Forcibly disconnecting plastic parts: first determine how they are released; pulling or prying can damage an otherwise functional cable end.

Reasons why the part becomes damaged

Gear shift mechanisms and cables generally develop faults mainly due to mechanical wear and increased resistance in the control mechanism. The following causes do not describe defects identified in the part offered:

  • Wear of joints and bushings caused by repeated gear shifting, which can lead to increased play and less precise operation.
  • Ingress of moisture and dirt through damaged protective components, followed by corrosion and impaired cable movement.
  • Damage to the sheath or kinking of a cable due to incorrect routing or careless handling.
  • Excessive force when shifting, especially if another part of the gear shift or transmission mechanism is causing increased resistance.
  • Incorrect adjustment and loose mounting, which can place excessive stress on the cable ends, brackets and gear shift mechanism itself.

Informazioni aggiuntive

Peso 11 kg

Se non diversamente indicato nella descrizione, tutte le foto sono a scopo illustrativo.

Ci riserviamo il diritto di sostituire la referenza ordinata con la referenza sostitutiva indicata dal produttore.

I ricambi provengono da veicoli sinistrati, sono accuratamente controllati e offriamo su di essi una garanzia di funzionamento per 12 mesi.