Tools, wrench, towing eye Citroën Peugeot 9675971080 9818516480 9820292980

€ 24.00

Stellantis CITROEN PEUGEOT
9675971080 9818516480 9820292980 671759

1 disponibili

COD: 9965-P3_K18 Categoria: Tag: , ,

Descrizione

Tool kit: wheel wrench, towing eye for CITROËN, PEUGEOT and other Stellantis models
Tools (Allen key) for removing and adjusting the light

Part description

The used tool kit with a wheel wrench and towing eye is a practical addition to missing vehicle equipment. The wrench is used to loosen and tighten wheel fasteners, while the towing eye is used to attach a towing device in the manner permitted by the vehicle manufacturer. The kit is suitable for auto repair shops as well as drivers who want to have the necessary tools ready for emergencies.

When selecting, compare product numbers 9675971080, 9818516480 and 9820292980 and the tool design with the original equipment. A matching model name alone is not a substitute for checking the wrench dimensions and the towing eye thread design.

Technical information

  • Manufacturer: not specified; the source documents state the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER, Toyota ProAce City.
  • Part type: tool kit.
  • Listed contents: wheel wrench, towing eye.
  • Condition: used auto parts.
  • Other numbers: not specified.
  • Wrench dimensions and eye thread specifications: not specified.

Product codes

  • Product codes: 9675971080, 9818516480, 9820292980.

The numbers are listed together in the source documents for this offer. Their assignment to individual components of the kit and whether they are interchangeable are not specified.

Installation recommendations

In general, the following applies to this type of part: this is portable equipment, not a part intended for permanent installation. The following procedure therefore describes checking, safe use and storage of the kit. The exact method of using the wrench, fitting the towing eye and towing conditions depend on the specific model and vehicle configuration; follow the vehicle owner’s manual.

1) Before installation

  • Compare the markings and shape of the tools with the original kit. For the wrench, check its size and fit on the wheel fastener; for the eye, check the diameter, pitch, direction and length of the thread.
  • Inspect both the wrench and the eye: they must not show cracks, significant bends or deep corrosion. Check the wear on the wrench’s working profile and ensure the eye’s thread is undamaged.
  • Check the vehicle owner’s manual to determine whether towing is permitted and under what conditions. Do not use damaged tools or tools that do not match the required dimensions.

2) Required tools and materials

For preparation, have protective gloves, a cloth, a soft brush and the vehicle owner’s manual ready. Choose any additional equipment according to the intended task and the manufacturer’s instructions. A wheel wrench and towing eye are not substitutes for equipment required to safely lift and secure the vehicle.

3) Step-by-step installation procedure

  1. Park the vehicle in a safe place and secure it against unintended movement. In an emergency, first ensure the safety of people and make the vehicle visible.
  2. Remove the tools, clean off any dirt and inspect the stressed parts, the wrench’s working profile and the eye’s thread.
  3. Depending on the intended use, check the relevant wheel fasteners or the threaded fitting designated by the manufacturer for the towing eye.
  4. When working on a wheel, fully seat the wrench on the fastener. If it has excessive play or does not fit properly, do not proceed.
  5. Apply force to the wrench smoothly and along its axis. Do not strike it or use an improvised extension; when changing a wheel, follow the prescribed procedure for lifting and securing the vehicle.
  6. After working on a wheel, perform the final tightening with a suitable torque tool, as specified by the manufacturer. A manual wrench alone does not allow the tightening torque to be determined reliably.
  7. When using the towing eye, access only the designated fitting as described in the manual and clean its thread. Start screwing in the eye by hand; if you encounter unusual resistance, remove it and check that it is correctly aligned.
  8. Seat and secure the eye as specified by the manufacturer. Attach the towing device only after checking that the eye is firmly secured; do not apply a load to an eye that is only partially screwed in.
  9. Tow only in the permitted manner and without shock loading. Do not use the eye for recovery unless the manufacturer expressly permits this use.
  10. After use, clean and dry the tools and inspect them again. Store them in the designated compartment so they cannot move freely while driving.

4) Post-installation checks and test drive/functional verification

After working on a wheel, check that it is correctly seated and tightened to the specified torque. During subsequent driving, watch for unusual vibrations or noise; if any occur, stop safely and investigate the cause. After using the towing eye, check for deformation and thread damage. Adding the kit to the vehicle’s equipment does not require a test drive.

5) Common installation mistakes and how to avoid them

  • Incorrect wrench size: before use, check that it fits fully and securely; otherwise, the edges of the fastener may be damaged.
  • Cross-threading the eye: start by hand and never force it past resistance.
  • Eye not fully seated: always check that it is fully secured in accordance with the vehicle owner’s manual before applying a load.
  • Tightening the wheel by guesswork only: verify the final tightening with a suitable torque tool.
  • Shock loading and improper use: observe the intended purpose of the tools and the restrictions set by the vehicle manufacturer.

Reasons why the part gets damaged

With this type of tool, damage is generally caused by improper use or storage, rather than by normal storage in the vehicle.

  • Overloading the wrench when loosening seized fasteners, striking it or using an unauthorized lever can cause it to bend or break.
  • Incomplete engagement of the wrench wears down its working profile and damages the edges of bolts or nuts.
  • A dirty or incorrectly fitted eye thread can be damaged if the eye is screwed in by force.
  • Impacts while towing or unauthorized recovery operations can deform the eye and damage its mounting point.
  • Prolonged exposure to moisture and dirt promotes corrosion, which reduces the usability of the thread and the strength of stressed parts.

Informazioni aggiuntive

Peso 1.5 kg

Se non diversamente indicato nella descrizione, tutte le foto sono a scopo illustrativo.

Ci riserviamo il diritto di sostituire la referenza ordinata con la referenza sostitutiva indicata dal produttore.

I ricambi provengono da veicoli sinistrati, sono accuratamente controllati e offriamo su di essi una garanzia di funzionamento per 12 mesi.