Descrizione
Right rearview mirror for PEUGEOT 407 vehicles
Electrically adjustable, power-folding, heated, temperature sensor
Color EXL – OBSIDIAN BLACK PAINT
Passenger side
Available in various colors
Part description
This used right rearview mirror for Peugeot 407 is suitable for the passenger side and is a good choice when replacing a damaged mirror. It offers electric adjustment, power folding, heating, and a temperature sensor. When choosing a replacement, compare not only its appearance but also the electrical connection and features of the original mirror.
The part is listed under numbers 96457004XT and 8149VC, which help identify the matching version. The listed color is EXL – OBSIDIAN black paint; EXLD also appears in the product designation. Various colors are available, so pay attention to the color of the specific item when making your selection.
Technical information
- Manufacturer: not specified
- Model: Peugeot 407
- Part type: complete exterior rearview mirror
- Side: right, passenger side
- Adjustment: electric
- Folding: electric
- Features: heated, temperature sensor
- Color: EXL – OBSIDIAN BLACK PAINT
- Condition: used part
- Additional number: EXLD – supplementary designation from the source information
Product codes
- Product codes: 96457004XT, 8149VC
- Designation in the source information: EXLD
- Model: Peugeot 407
Check that the numbers match, together with the connector type, mounting, and mirror functions. Matching color alone is not enough to select the correct replacement.
Installation recommendations
The following procedure generally applies to this type of part. The exact method for accessing the fasteners, removing the trim, and disconnecting the electrical system depends on the specific vehicle version. Follow the manufacturer’s service procedure.
1) Before installation
- Compare the product numbers, right-hand version, base shape, and mounting points with the old mirror.
- Check the connector shape, number and arrangement of contacts, and matching functions: adjustment, folding, heating, and temperature sensor.
- Inspect the glass, housing, mounts, wiring, and sealing surfaces. Look for cracks, damaged insulation, and oxidized contacts.
- Do not force the power-folding mechanism by turning it by hand.
2) Required tools and materials
Suitable hand tools for the fasteners used, a plastic trim removal tool, protective tape for the paintwork, a soft pad, and a cloth for cleaning the mating surfaces are usually sufficient. A multimeter and the wiring diagram for the specific vehicle can be used if electrical troubleshooting is needed.
3) Step-by-step installation procedure
- Secure the vehicle against movement and, if possible, check the functions of the original mirror to distinguish a faulty part from an electrical system fault.
- Switch off the ignition and secure the electrical system according to the manufacturer’s instructions. If the battery needs to be disconnected, follow the prescribed procedure.
- Protect the surrounding paintwork and carefully remove the covers or trim required to access the connection and fasteners.
- Note the wiring route. Release the connector lock and disconnect it by pulling on the connector body, not the wires.
- Support the mirror from the outside and gradually loosen the fasteners. Do not let its weight hang from the wiring.
- Remove the original mirror and clean the mating surface. Check the condition of the seal and the area around the mounting.
- Position the replacement mirror, fit the seal correctly, and route the wiring so that it cannot be pinched anywhere.
- Start the fasteners without forcing them, check that the base is seated correctly, and tighten them according to the manufacturer’s instructions.
- Connect and secure the connector. Route the wiring back along its original path, away from moving parts.
- Restore the power supply using the prescribed procedure and check the functions. If everything is working correctly, finish installing the covers and trim.
4) Post-installation checks and function test
Test electric adjustment in both directions, folding, and return to the operating position. Check the heating under the conditions specified for its activation in the vehicle manual. Also check that the outside temperature reading is plausible once it has stabilized. Adjust the mirror for a clear view before driving and check that it is securely mounted. During a short test drive, watch for image vibration and unusual aerodynamic noise.
5) Common installation errors and how to avoid them
- Choosing the wrong electrical version: compare the connectors, contacts, and all functions before installation.
- Pinched wiring: check the wiring route and position before tightening.
- Incorrectly seated seal: install on a clean mating surface and check that the seal sits evenly.
- Overtightened fasteners: follow the service instructions to avoid damaging the base or mounts.
- Forcing the mirror to fold: operate the mechanism electrically; if it resists, first find the cause.
Reasons why the part may be damaged
A common cause of damage to exterior rearview mirrors is an impact while parking, contact with an obstacle, or forcibly turning the folding mechanism. The glass, housing, and mountings can also be damaged by vibration if the mirror is loosely installed.
- Moisture and corroded contacts can cause intermittent electric adjustment, heating, or temperature sensor operation.
- Wear to the motor and gears can result in irregular movement, noise, or a folding mechanism that does not work.
- Ice and mechanical obstruction increase the load when attempting to adjust or fold the mirror.
- Damaged wires or connector can interrupt the power supply or signal transmission, even if the mechanism itself remains functional.
