Alternatore Valeo CL8+ Citroën Peugeot 9649611780

€ 61.00

Stellantis CITROEN PEUGEOT
9649611780 1638104480
5705AW 5705NH 5705FA

1 disponibili

Descrizione

VALEO CL8+ alternator for Citroen and Peugeot vehicles

Part description

Used Valeo CL8+ alternator with part number 9649611780 is a component of the charging system in Citroën and Peugeot vehicles. While the engine is running, the alternator supplies electrical consumers and charges the battery. Its proper operation is important for reliable starting and a stable power supply to the vehicle’s electrical equipment.

When replacing a faulty alternator, it is essential to match the product designation and design. This part offers a repair option using a used Valeo alternator. Specific vehicle models, engine variants, and electrical specifications are not provided in the available information, so compare the listed numbers and design with the original part when selecting a replacement.

Technical information

  • Manufacturer: Valeo
  • Model: not specified; only the Citroën and Peugeot vehicle makes are listed
  • Alternator designation: CL8+
  • Part type: alternator
  • Condition: used part
  • Main product number: 9649611780
  • Additional numbers: 1638104480, 5705AW, 5705NH, 5705FA
  • Rated voltage and charging current: not specified

Product codes

Product codes: 9649611780, 1638104480, 5705AW, 5705NH, 5705FA.

These designations are listed in the product information and can help you find a replacement alternator. In addition to matching the designation, compare the mounting points, electrical connections, and pulley with the old unit.

Installation recommendations

The following procedure is a general guide to replacing an alternator. Access to the part, the method for releasing the belt, and the procedure for working on the electrical system depend on the specific vehicle model and configuration. Follow the vehicle manufacturer’s service instructions.

1) Before installation

  • Compare the designations on the original and replacement alternators, housing shape, mounting points, electrical connectors, and power cable terminal.
  • Check that the pulley design, offset, and grooves match. Compare the electrical specifications using the labels and service information.
  • Inspect the used part, especially for cracks in the housing, damaged threads, connector damage, corroded contacts, and traces of contamination by oil or other fluids.
  • Check that the pulley turns freely by hand; significant play, binding, or unusual noise must be assessed before installation. Spinning the pulley alone does not confirm electrical functionality.
  • Also check the battery, wiring, ground connections, and accessory drive. A charging fault may not be caused by the alternator alone.

2) Tools and materials required

  • A standard set of wrenches and sockets, a torque wrench, and suitable tools for releasing belt tension, depending on the vehicle configuration.
  • A multimeter or a suitable device for checking the charging system.
  • Products for safely cleaning contacts, a clean cloth, and protective gloves.
  • A way to record the belt routing and cable connections before removal.

3) Step-by-step installation procedure

  1. Secure the vehicle safely, switch off the ignition, and allow the engine to cool.
  2. Follow the prescribed procedure for allowing the electronics to go to sleep, then disconnect the battery according to the manufacturer’s instructions. Do not work on the alternator’s high-current connection while it is live.
  3. Access the alternator by removing only the covers or surrounding components required for the specific vehicle configuration.
  4. Record the auxiliary belt routing, connector positions, and cable routing.
  5. Release the tension as prescribed and remove the belt from the alternator pulley. Check its condition and the condition of any accessible pulleys.
  6. Disconnect the alternator’s electrical connections. Release connector locks without using force and secure the cables to prevent damage.
  7. Support the alternator, undo its fasteners, and carefully remove it.
  8. Compare the two parts side by side and clean the mating surfaces. Check the condition of the fasteners and brackets.
  9. Position the replacement alternator without forcing it into place. Tighten the fasteners in the sequence and to the values specified by the vehicle manufacturer.
  10. Reconnect the electrical wiring, secure the connectors, and refit the protective terminal covers. Route the cables away from moving and hot parts.
  11. Fit the belt following the recorded routing and restore the correct tension using the prescribed procedure. Check that it is seated in all grooves.
  12. Reinstall the removed components, check the work area, and reconnect the battery according to the manufacturer’s procedure.

4) Post-installation checks and function verification

  • After starting the engine, check the charging warning light and any vehicle alerts.
  • From a safe distance, check that the belt runs smoothly and listen for squealing, binding, or knocking. Keep your hands and tools away from the running drive.
  • Measure charging system operation according to the service procedure, including with electrical consumers switched on if appropriate. Assess the results according to the vehicle’s specific charging system.
  • Never test the alternator by disconnecting the battery while the engine is running. This may damage the electronics.
  • If the checks reveal no problems, take a short test drive. After switching off the engine, visually check the belt, fasteners, and cable routing again.

5) Common installation mistakes and how to avoid them

  • Choosing a part based only on the vehicle make: always compare the product numbers, electrical specifications, and mechanical design.
  • Working with the battery connected: before handling high-current contacts, safely disconnect the power supply according to the service instructions.
  • Incorrect belt routing or seating: record the routing before removal and check all grooves before starting the engine.
  • Dirty or loose contacts: check that connections are clean and secure, and that the terminals are protected against short circuits.
  • Overlooking the original cause of the fault: fix any fluid leak, tensioning fault, or wiring problem to prevent damage to the replacement part as well.

Reasons why the part may be damaged

Alternators can generally fail as a result of normal wear as well as faults in surrounding components. The following overview does not describe the known condition of this specific unit.

  • Wear to bearings, brushes, and slip rings due to prolonged operation.
  • Failure of the regulator or rectifier section, which can lead to insufficient or unstable charging.
  • Ingress of oil, water, or other contaminants, which damages electrical and mechanical components.
  • Faults with the belt, tensioning system, or pulleys, which can cause slippage, vibration, and increased bearing stress.
  • Faulty electrical connections and ground connections, leading to contact resistance, overheating, and charging problems.
  • Prolonged overloading, a short circuit, or improper handling of the battery, which can damage the alternator’s electrical components.

Informazioni aggiuntive

Peso 6 kg

Se non diversamente indicato nella descrizione, tutte le foto sono a scopo illustrativo.

Ci riserviamo il diritto di sostituire la referenza ordinata con la referenza sostitutiva indicata dal produttore.

I ricambi provengono da veicoli sinistrati, sono accuratamente controllati e offriamo su di essi una garanzia di funzionamento per 12 mesi.