Descrizione
Armrest joint for the right passenger seat for CITROEN, PEUGEOT and other Stellantis models
Rigid
Part description
The used passenger armrest joint 1684935080 is a mechanical component that attaches the armrest to the right seat. When repairing a damaged attachment, the fault can be addressed by replacing the joint alone, provided the other parts of the armrest are in good condition. A secure armrest attachment contributes to comfortable seat use and limits unwanted movement at the joint.
The source materials list the Citroën Berlingo K9, PEUGEOT RIFTER, FIAT DOBLO III, OPEL COMBO E K9 and Toyota ProAce City models. When selecting a part, rely primarily on the product number 1684935080 and a match between its design and the original part; the model name alone may not distinguish all seat and armrest variants.
Technical information
- Manufacturer: Stellantis
- Model: Citroën Berlingo K9 | FIAT DOBLO III | OPEL COMBO E K9 | PEUGEOT RIFTER | Toyota ProAce City
- Part type: armrest joint
- Application: armrest for the right passenger seat
- Condition: used part; described in the original listing as “Rigid”
- Other numbers: not specified
Product codes
- Product codes: 1684935080
The number can be used to find the part and compare it with the marking on the original joint. Before replacement, also compare the shape, attachment points and connection to the armrest.
Installation recommendations
The following general procedure applies to this type of mechanical part. The exact method for accessing, securing and removing the joint depends on the specific model and seat variant. The source materials do not include the manufacturer’s installation procedure.
1) Before installation
- Compare the product number, joint shape, mounting surfaces and attachment method with the old part.
- Inspect the used part, looking for cracks, deformation, damage to contact surfaces, and any threads or locking components.
- Also check the mating part on the seat and the armrest itself. Replacing the joint will not eliminate play caused by damage to surrounding parts.
2) Tools and materials required
Prepare standard hand tools suitable for the actual fasteners, and, if needed, a plastic trim tool for the covers, a flashlight, a soft pad, a cleaning cloth and a container for small parts. Determine the tightening method and whether new locking components are required according to the service procedure for the specific variant.
3) Step-by-step installation procedure
- Park the vehicle safely and secure it against movement. Adjust the seat to allow easy access to the armrest.
- Protect the upholstery and surrounding trim from scratches. Take a photo of the original assembly and the armrest position.
- If a cover obstructs access, release it with a suitable tool according to its attachment method. Do not pry blindly against resistance.
- Check how the joint is secured and support the armrest so that it does not put strain on surrounding parts when the connection is released.
- Gradually loosen the fasteners. Keep the removed components in the order in which they were removed and note their orientation.
- Remove the damaged joint without forcing it. If it will not release, check again to make sure it is not still locked in place.
- Clean the accessible contact surfaces and inspect the attachment points. If you find cracks or deformation, address their cause first.
- Install the replacement joint in the same orientation as the original part. It must seat correctly without having to force it into position with the fasteners.
- Restore the fastening and locking according to the manufacturer’s procedure. Do not reuse damaged fasteners or overtighten the connections.
- Carefully check the armrest’s operation, then refit any covers. Make sure no upholstery is trapped anywhere.
4) Post-installation checks and function test
With the vehicle stationary, test the armrest throughout its normal range of use. Check that the attachment is stable, there is no play or unusual noise, and the covers are seated correctly. Apply weight to the armrest gradually, using only normal arm pressure. After a short drive, check again for knocking or looseness; perform this check only after stopping.
5) Common installation mistakes and how to avoid them
- Choosing the wrong variant: compare the number and design details of both parts before installation.
- Incorrect component orientation: a photo of the original assembly and keeping the removed parts in order can help.
- Overtightening connections or forcing parts into place: first check that the parts are seated correctly and follow the manufacturer’s procedure.
- Overlooking damage to the mating part: inspect the entire attachment, not just the joint being replaced.
Reasons why the part becomes damaged
For armrest joints, common general causes of damage include prolonged mechanical stress, wear at the connection or overloading the armrest. This does not establish the cause of damage to this specific part.
- Leaning one’s full body weight on the armrest when getting in or out of the vehicle.
- Side impact, sudden pressure or movement against the stop.
- A loose attachment that gradually increases stress on the joint and mating part.
- Improper removal, incorrect reassembly or overtightened connections.






