Descrizione
ESP switch for CITROËN, PEUGEOT and other Stellantis models
Part description
This used Citroën Peugeot ESP switch, bearing part numbers 9817027877 and 98170278ZD, is a replacement part for repairing the electronic stability control system. It is suitable for replacing the original switch if it is mechanically damaged or not working, provided the fault is actually in the switch itself.
The source materials list the Citroën Berlingo K9, FIAT DOBLO III, OPEL COMBO E K9, PEUGEOT RIFTER and Toyota ProAce City models. When selecting a part, it is important to compare the product number, connector and mounting design with the original part; the model name alone may not be enough to ensure the correct selection. This used part offers an option for replacing a damaged switch without purchasing a new one.
Technical information
- Manufacturer: not specified; Stellantis / CITROEN / PEUGEOT are listed in the source materials.
- Model: Citroën Berlingo K9; FIAT DOBLO III; OPEL COMBO E K9; PEUGEOT RIFTER; Toyota ProAce City.
- Part type: ESP switch, electrical control component.
- Condition: used part.
- Product numbers: 9817027877, 98170278ZD.
- Other numbers: not specified.
- Model years, engine variants and specific trim configurations: not specified.
Product codes
Product codes: 9817027877, 98170278ZD.
Both numbers are taken from the source materials for this product. Before replacement, compare them with the number on the original switch and also verify that its physical design matches.
Installation recommendations
The following procedure is general guidance for replacing this type of electrical switch. The exact method for accessing, releasing and connecting it depends on the specific vehicle model and configuration. Follow the manufacturer’s service procedure; the source materials do not include specific installation instructions for this item.
1) Before installation
- Compare the part number, shape, dimensions, control surface, mounting and connector with the original part.
- Inspect the used switch: check for cracks, damaged clips, the condition of the contacts, and any signs of moisture or corrosion.
- Check that the control moves without sticking. Do not use excessive force.
- Before replacement, distinguish a faulty switch from a wiring problem or a fault in the ESP system itself. An illuminated ESP warning light alone does not confirm a faulty switch.
2) Tools and materials required
- Plastic tools for carefully releasing trim.
- Standard hand tools, depending on the fasteners used.
- A flashlight, a clean cloth and, if necessary, an electrical contact cleaner suitable for the materials involved.
- If needed, a measuring device or diagnostic equipment to determine the cause of the fault.
3) Step-by-step installation procedure
- Park the vehicle safely, secure it against movement and switch off the ignition.
- Following the manufacturer’s procedure, allow the electrical systems to enter their sleep state and disconnect the battery before working on the electrical connections.
- Refer to the service documentation for the specific vehicle to determine how to access the switch. Do not pry at surrounding parts blindly.
- If trim needs to be removed, release its fasteners with a suitable tool and protect visible surfaces from scratches.
- Before disconnecting the switch, note its orientation and the cable routing, for example by taking a photograph.
- Release the switch from its mount without bending the clips excessively or pulling on the wires.
- Unlock the connector and disconnect it by pulling on its body, not on the wires.
- Inspect the connector and accessible wiring. Repair any damage or corrosion before connecting the replacement part.
- Compare the two switches again and connect the replacement. The connector must seat fully and its lock must secure the connection properly without force.
- Fit the switch into its mount, check that the wiring is routed freely and refit any trim that was removed.
- Reconnect the battery and return the vehicle to operation according to the manufacturer’s procedure. Then check that the switch works.
4) Post-installation checks and function verification
- Check that the switch is firmly seated, the button operates correctly and the surrounding trim is securely fitted and undamaged.
- Under the conditions specified in the vehicle owner’s manual, check the system’s response to the switch and observe the relevant indicator, if used in that configuration.
- If the switch does not respond or the ESP fault persists, continue with diagnostics. Do not replace the part again without determining the cause.
- Only carry out a test drive after the basic checks have been completed successfully, with the safety systems active. Do not test the function by deliberately inducing a skid; if the ESP fault remains unresolved, have the vehicle professionally assessed first.
5) Common installation mistakes and how to avoid them
- Selecting by appearance alone: also compare the product number, connector and mounting.
- Breaking the clips: first determine how they are secured and use suitable tools.
- Pulling on the wires: disconnect the connector only after unlocking it, and hold it by its body.
- Connector not fully seated or wiring pinched: check the connection and wire routing before refitting the trim.
- Confusing a system fault with a button fault: use suitable diagnostics to verify the cause of the problem before replacement.
Reasons why the part may be damaged
The following are general causes of damage that may affect electrical switches of this type; they do not describe any faults identified on the item offered:
- Mechanical wear of the control mechanism and contacts due to repeated use.
- Excessive pressure or impact that damages the button, switch housing or mounting.
- Ingress of liquids, moisture and dirt, which may cause sticking or contact corrosion.
- Careless removal, which may break the clips or damage the connector.
- Damaged or loose electrical connection, which may cause intermittent operation or produce symptoms similar to a fault in the switch itself.




