Descrizione
Right armrest for the front passenger seat for CITROEN, PEUGEOT and other Stellantis models
Used part – may be dirty – must be cleaned
Fixed
Part description
Citroën Peugeot passenger armrest 9826490980 supports the forearm and makes travelling more comfortable. This used interior part, in a fixed design, is intended for the right front passenger seat and provides a practical replacement for a damaged or worn armrest, provided it matches the original mounting and seat design.
When selecting a replacement, compare the product number 9826490980, shape and mounting section with the old part in particular. Please note that the part may be dirty: it must be cleaned before use. The specific colour and surface material are not stated in the available information.
Technical information
- Manufacturer: not specified; the available information lists Stellantis / CITROEN / PEUGEOT.
- Model: Citroën Berlingo K9 | FIAT DOBLO III | OPEL COMBO E K9 | PEUGEOT RIFTER | Toyota ProAce City.
- Part type: passenger armrest.
- Location: right front passenger seat.
- Design: fixed.
- Condition: used part; may be dirty and must be cleaned.
- Other numbers: not specified.
The model names are taken from the product labels. They do not mean that the armrest design is identical for all seat variants; the matching shape and mounting are also decisive.
Product codes
- Product codes: 9826490980.
Use the number 9826490980 when searching for a replacement armrest and comparing it with the number on the original part.
Installation recommendations
The following procedure applies generally to this type of interior part. The exact mounting mechanism is not described in the available information. Adapt removal and installation to the specific seat and the vehicle manufacturer’s service instructions.
1) Before installation
- Compare the part number, shape, dimensions, orientation and mounting method with the original armrest.
- Inspect the used part, especially the load-bearing and mounting sections. Do not install an armrest with cracked or deformed mounting points.
- Also check the mating part on the seat. Damaged seat mounting points may cause looseness even after the armrest has been replaced.
- Clean the surface with a product suitable for the actual material. Test it on an inconspicuous area first, do not soak the part, and allow it to dry.
2) Tools and materials required
- Hand tools appropriate for the actual type of mounting.
- Plastic trim removal tool for any covers.
- Soft cloths, a suitable cleaning product and protection for the surrounding upholstery.
- A container for removed fasteners and adequate lighting.
3) Step-by-step installation procedure
- Park the vehicle in a safe place, secure it against movement and switch off the ignition.
- Adjust the seat to make the mounting accessible and cover the surrounding upholstery to protect it from damage.
- Inspect the original mounting and consult the service procedure to determine how to release it. Do not interfere with unknown mechanisms or electrical seat connectors.
- If the mounting is covered by a cap, carefully remove it using a suitable tool. Do not force it off without knowing the position of the clips.
- Before disassembly, record the armrest’s orientation and the order of the mounting components, for example by taking a photograph.
- Support the armrest and release its locking mechanism in a way that is appropriate for the mounting design.
- Remove the original part without using force. If it will not come free, first check whether it is still secured by another component.
- Clean the contact surfaces and inspect the seat mounting. Stop the installation if there are cracks, deformation or a damaged joint.
- Compare the removed armrest and the replacement side by side. Do not modify a different mounting by drilling or sanding, or force the part into place.
- Position the replacement armrest in the correct orientation and secure it according to the manufacturer’s instructions. If the joint is screw-fastened, follow the specified tightening procedure.
- Refit any covers and check that the part is seated correctly, the mounting is secure and the surrounding seat components move freely.
4) Checks after installation and function verification
- With the vehicle stationary, apply moderate hand pressure to the armrest. It must not come loose, move in its mounting or exhibit unusual play.
- Check that it does not interfere with seat controls, the seat belt or access to its buckle.
- If everything is securely fastened, listen for any rattling or squeaking during a short test drive. Carry out any further checks or tightening only after stopping safely.
5) Common installation mistakes and how to avoid them
- Choosing based only on the model name: also compare the product number, shape and actual mounting.
- Forcing off covers: first determine how they are secured and use suitable trim removal tools.
- Mixing up the order of mounting components: photograph the assembly before disassembly and keep the parts organised.
- Installing into a damaged mating part: check the condition of the seat mounting before fitting the replacement armrest.
- Insufficient or excessive tightening: follow the manufacturer’s instructions rather than relying on guesswork or force.
- Aggressive cleaning: choose a product suitable for the surface, use minimal moisture and install the part only once it is dry.
Reasons why the part may become damaged
The following are common causes of damage to armrests. This is not a description of defects identified on the item offered.
- Excessive load: putting your full body weight on the armrest when getting in or out may damage the load-bearing section or mounting.
- Everyday wear: long-term use puts stress on the surface and mounting components, which may gradually develop play.
- Impacts and snagging on objects: careless handling of luggage or other objects may damage both the surface and the structure.
- Improper maintenance: aggressive products, coarse brushes and excessive moisture may damage the armrest surface.
- Incorrect removal or installation: forceful prying, incorrect positioning and improper tightening may damage the mounting.






