Scatola filtro 1.6 16V NFU Citroën Peugeot 1420P0 1680408380

€ 42.00

Stellantis CITROEN PEUGEOT
1420P0 1680408380

1 disponibili

COD: 9964-E4_K27 Categorie: , , Tag: ,

Descrizione

Filter box, air filter housing 1.6 16V NFU for Peugeot and Citroen vehicles

Part description

Used air filter housing for the 1.6 16V NFU engine is intended for Citroën and Peugeot vehicles; the source materials list the models Citroën C4 and Peugeot 307. When selecting a part, compare in particular the product numbers 1420P0 and 1680408380, the shape of the housing, the mounting points and the intake pipe connection with the original part.

The filter box houses the air filter and ensures it is correctly seated in the intake system. An undamaged housing and well-seated connections help prevent air from bypassing the filter element. Replacing a damaged housing is a practical solution if there are cracks, broken mounting points, or a cover that no longer closes properly. The source materials do not specify whether a filter element or other accessories are included.

Technical information

  • Manufacturer: not specified; the source materials list the designation Stellantis CITROEN PEUGEOT.
  • Model: Citroën C4, Peugeot 307.
  • Engine: 1.6 16V NFU.
  • Part type: filter box – air filter housing.
  • Condition: used car part.
  • Other numbers: not specified.

Product codes

  • Product codes: 1420P0, 1680408380.

These numbers are an important reference when looking for a replacement filter box. The model name alone is no substitute for comparing the markings and design of the original part.

Installation recommendations

The following procedure is a general guide to replacing an air filter housing. The exact steps, fastening method and extent of removal of surrounding components depend on the specific model and vehicle version.

1) Before installation

  • Compare the markings, shape, dimensions, mounting points and pipe connections with the old part.
  • Inspect the used housing inside and out. Check for cracks, deformation, damaged threads, latches and mating surfaces.
  • Check that the cover closes properly and that the filter element can be seated evenly.
  • Check the condition of the filter element and the hoses to be connected. Do not reuse a damaged or heavily contaminated filter.

2) Tools and materials required

Standard hand tools suitable for the fasteners used are usually sufficient, along with a tool for releasing clamps if necessary, a flashlight and a clean, lint-free cloth. Have a clean cover ready to temporarily protect the open intake. Choose the tools based on the actual fastening method on the vehicle.

3) Step-by-step installation procedure

  1. Park the vehicle on level ground, secure it against movement, switch off the engine and ignition, and allow the engine to cool.
  2. Check access to the filter box and note the routing of the pipes, the position of the clamps and the mounting method, for example by taking a photograph.
  3. Clean around the connections to prevent dirt from entering the intake pipe when it is disconnected.
  4. Disconnect the intake pipe and any other connections. If electrical connectors are present, disconnect them using their locking tabs, not by pulling on the wires.
  5. Open the housing and remove the filter element if required by the design and access. Do not allow dirt to spill into the clean section of the intake.
  6. Release the fasteners and carefully remove the original filter box. Do not pry it off using plastic necks or surrounding components.
  7. Temporarily cover the open inlet of the connected intake pipe with a clean cover. Inspect and clean accessible mounting points and mating surfaces.
  8. Prepare the replacement housing: remove loose dirt, and transfer any components only if they match the design and are undamaged.
  9. Fit the filter box into its mounting points without forcing it, and fasten it according to the service procedure for the vehicle. Do not overtighten plastic connections.
  10. Insert the appropriate air filter, check that its sealing edge is seated evenly, and close the housing without pinching the filter element.
  11. Remove the temporary intake cover, reconnect the pipe and any other connections, and secure all clamps and connectors. Finally, check that no objects have been left in the intake.

4) Post-installation checks and function test

  • Before starting the engine, check that the cover is closed, the housing is securely mounted and the pipe is fully fitted.
  • Start the engine and listen for unusual hissing, rattling or vibration. Carry out the check safely, away from moving and hot parts.
  • If everything is in order, take a short test drive and check that there is no unusual intake noise or change in engine operation.
  • After the drive, switch off the engine and, once it has cooled, check the housing connections and fasteners again.

5) Common installation errors and how to avoid them

  • Pinched filter element: before closing the cover, check that the element is seated all the way around.
  • Overtightened screws or latches forced shut: first check that the cover is correctly positioned and follow the service instructions.
  • Loose or incorrectly seated pipe connections: visually inspect every connection after installation and carefully check it by hand.
  • Dirt or a forgotten cover in the intake: keep open pipes protected and check that they are clear before reconnecting them.
  • Housing installed under tension: first correctly seat all mounting points; do not try to correct misalignment by tightening with force.

Reasons why the part gets damaged

Plastic air filter housings can generally be damaged in the following ways. This is not a description of defects found on this specific part.

  • Material aging and thermal stress: plastic can gradually become brittle and more prone to cracking.
  • Careless filter replacement: prying at the cover, overtightening connections or closing it incorrectly can damage the latches and threads.
  • Vibration and loose mounting: movement of the housing puts stress on the mounting points and connected necks.
  • Mechanical impact: damage can occur in an accident or while working on surrounding components.
  • Incorrectly seated pipe or filter: constant stress or forcing the housing closed can cause deformation and leaks.

Informazioni aggiuntive

Peso 2 kg

Se non diversamente indicato nella descrizione, tutte le foto sono a scopo illustrativo.

Ci riserviamo il diritto di sostituire la referenza ordinata con la referenza sostitutiva indicata dal produttore.

I ricambi provengono da veicoli sinistrati, sono accuratamente controllati e offriamo su di essi una garanzia di funzionamento per 12 mesi.